Martin Rush MH 6 Wash CT
Martin Rush MH 6 Wash CT
  • Carica l'immagine nel visualizzatore di Gallery, Martin Rush MH 6 Wash CT
  • Carica l'immagine nel visualizzatore di Gallery, Martin Rush MH 6 Wash CT

Martin Rush MH 6 Wash CT

Prezzo di listino
Prezzo scontato
Prezzo di listino
Prezzo unitario
Imposte incluse.

The RUSH MH 6 Wash CT is designed for key lighting applications within the House of Worship, Performing Arts and Live Stage environments where color temperature control of white light is critical but also a compact and light weight design is desired for smaller applications

The RUSH MH 6 WASH CT is a bright single-lens LED moving head with fully premixed white color temperatures. With twelve 10W WW/CW (warm white and cold white) LEDs and a 10° to 60° motorized zoom, it offers full electronic dimming and variable strobe effects controlled via DMX.

  • Pre mixed white light ranging from 2,700K to 7,800K    
  • 10-60 Degree Zoom System
  • Compact and Lightweight Design


  • 2,700K to 7,800K Color Temp Range
  • Allows key lighting to be matched for multiple sources from Tungsten to Metal Halide
  • 10-60 Degree Zoom System
  • Compact and lightweight design
  • Can be used as a Mid effect with a tight beam look to washing a stage for key lighting applications
  • Ideal for applications that have limited ceiling height or weight restrictions.

PHYSICALLength: 290 mm (11.4 in.)Width: 189 mm (7.4 in.)Height: 360 mm (14.2 in.)Weight: 7.1 kg (15.7 lbs.)

DYNAMIC EFFECTSElectronic shutter effect: Instant open and blackoutElectronic dimming: 0 - 100%, four dimming curve optionsStrobe and pulse effects: Variable speed and action, random strobeColor mixing: RGBWColor presets: 36 color presets plus full white, ‘color wheel’ effectsZoom: MotorizedPan: 540°Tilt: 200°

CONTROL AND PROGRAMMINGControl options: DMX16-bit fine control: Dimming, pan and tiltWhite balance control: RGB adjustmentDMX channels: 14DMX address setting: Control panel with LCD displayDMX compliance: USITT DMX512/1990

OPTICSZoom range: 10° - 60°Light source: 12 x 10W OSRAM OSTAR WW/CW LEDsMinimum LED lifetime: 50,000 hours (to >70% luminous output)**Figure obtained under manufacturer's test conditions.

CONSTRUCTIONHousing: High-impact flame-retardant thermoplasticColor: BlackIngress protection rating: IP20

INSTALLATIONMinimum clearance around fan and air vents: 100 mm (4 in.)Mounting points: One quarter‐turn bracket for rigging clampLocation: Indoor use only, must be fastened to surface or structureOrientation: AnyMinimum distance to combustible materials: 100 mm (4 in.)Minimum distance to illuminated surfaces: 200 mm (8 in.)

CONNECTIONSAC power in, thru: Neutrik PowerConDMX data in, thru: 3-pin and 5-pin locking XLR

ELECTRICALAC power: 100-240 V nominal, 50/60 HzPower supply unit: Auto-ranging electronic switch modeFuse: T 3.15 ATypical half-cycle RMS inrush current: 11.3 A (at 240 VAC)Recommended Miniature Circuit Breaker: Type D*

*Per IEC 60898/UL489/CSA C22.2 No. 5
Power consumption figures are typical, not maximum. Allow for +/-10% variation.

TYPICAL POWER AND CURRENT120 V, 60 Hz: 1.3 A, 150 W, PF 0.99230 V, 50 Hz: 0.7 A, 150 W, PF 0.94Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.