The Tour Hazer II is a hazer with stage experience worldwide.
Detailed information is available at www.tourhazer.de.
Due to the water-based fluid, a clean production of fine haze is possible. The special fluid of the Tour Hazer enables us to minimize the consumption of the device. The Tour Hazer II requires only 1 ml/m for 40% performance. A 3ltr. canister Tour Hazer Fog is sufficient for 50 hours, i.e. 2 days continuous Haze.
Two DMX channels provide an individual effect that can be adjusted from very fine, barely visible haze to fog-like output.
With the BOXED Case, the device is immediately set up. Just 60 seconds after plugging in the power cable, the Tour Hazer II is heated up and ready for use.
Another advantage of the case design is commissioning in almost any position. Only on the side with the load inlet, the device should not be tilted during operation. This allows the Tour Hazer II to be placed optimally even on small stages.
With the variable air baffle, the Haze can still be directed in the desired direction.
The use of high-quality materials guarantees a long service life of the device.
Only the Tour Hazer Fluid should be used in order to use the device effectively and to maintain its long service life!
If original fluid is used, we grant 3 years warranty on our devices.
Made in Germany
Power |
1500Watt |
---|---|
Suspense |
240 V/50 Hz (also available as 110V version) |
fog season |
Permanent fog at 100% |
heating time |
~ 60 sec. |
fluid consumption |
8,9 ml/min. (max.output) | 1,0 ml/min. (40%) |
control options |
DMX 512, Stand-Alone, Timer (integrated), Analog 0-10V (cable remote control or radio remote control available as accessories), W-DMX (optional) |
Weight | Dimensions |
14,1 kg, 50 x 27 x 26,5 cm |