Martin Rush Strobe CWL
Martin Rush Strobe CWL
Martin Rush Strobe CWL

Martin Rush Strobe CWL

€590,00
€590,00
Agotado
Impuesto incluido.

This bright and compact LED linear strobe utilises 99 x 3 W Cree XP-D LEDs with a reflector design that offers a traditional Xenon strobe look with a 17,000 lumen output. From a single flash to a blinder effect, the RUSH™ Strobe CWL is the perfect companion for mobile DJs, lounge bars, venues and cruise ships. 

  • 99 x Cree XP-D 3 W cold white LEDs
  • Reflector design
  • 1-25 FPS and blinder effect
FEATURES
  • Compact LED linear strobe
  • 17,000 lumens output
  • Color system: 99 x cold white LED
  • 87° beam angle 
  • 8 strobe macros
 
SPECIFICATIONS

PHYSICALLength: 505 mm (19.9 in.)Width: 140 mm (5.5 in.)Height: 226 mm (8.9 in.)Weight: 4.0 kg (8.9 lbs.)

DYNAMIC EFFECTSStrobe rate: 0 - 25 HzStrobe duration: 0 - 10 ms (50 Hz supply), or 0 – 8.3 ms (60 Hz supply)Blinder effect: Continuous with auto fadeSpecial effects: Ramp up/down, up-down, random flash, lightning, blinder, single flash

CONTROL AND PROGRAMMINGControl options: DMX, stand-alone, master/slave, sound triggerDMX channels: 1 or 4Setting and addressing: Control panel with LCD displayCompliance: USITT DMX512/1990

OPTICSBeam angle: 87°Light source: 99 x 3 W CREE white XB-D LEDColor temperature: 7000-8000 KMinimum LED lifetime: 50 000 hours (to >70% luminous output)**Figure obtained under test conditions

CONSTRUCTIONColor: BlackHousing: Steel and aluminumProtection rating: IP 20

INSTALLATIONMounting points: Bracket with 13.5 mm holesOrientation: AnyLocation: Indoor use only, must be fastened to surface or structureMinimum distance to illuminated surfaces: 0.2 m (8 in.)Minimum distance to combustible materials: 0.1 m (4 in.)Minimum clearance around fans and vents: 0.1 m (4 in.)

CONNECTIONSAC power in/thru: Neutrik PowerConDMX data in/thru: 3-pin and 5-pin locking XLR

ELECTRICALAC power: 100-240 V nominal, 50/60 HzPower supply unit: Diode bridge

TYPICAL POWER AND CURRENT110 V, 60 Hz: 2.5 A, 250 W, PF 0.9230 V, 50 Hz: 2.7 A, 380 W, PF 0.6Measurements made at nominal voltage. Allow for a deviation of +/-10%.PF = Power Factor

THERMALCooling: Forced air (temperature regulated, low noise)Maximum ambient temperature (Ta max.): 40° C (104° F)Minimum ambient temperature (Ta min): 0° C (32° F)

APPROVALSEU safety: EN 60598-2-17 (EN 605981-1)EU EMC: EN 55015, EN55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547US safety: UL 1573US EMC: 47 CFR Part 15 Class ACanadian safety: CSA 22.2 No. 166Australia/NZ: C-Tick N4241
Volver a STROBO